The 212 Predator go-kart engine can be a serious upgrade for your go-kart. It is a very reliable engine and is primarily designed for off-road use. This blog will review the 212 predators go kart engine performance, show you how to maintain it, and answer any questions you may have.
- Top 8 Best Go-Kart Engine That You Shouldn’t Miss
- Predator 212 Vs Predator 420
- Predator 212 Hemi vs Non-Hemi
212 Predator Go Kart Engine Performance
No one can deny that Predator engines are powerful and efficient. They’ve quickly become the go-to choice for many go-karters because of their power and affordability. Many people love it for how much bang it gives them for their buck.
The manufacturer may say that it only has 8.1 ft-lbs of torque, but don’t be fooled- this engine is a powerhouse. This engine is capable of much more.
You do the math, you’ll see that even if its maximum torque was 3600 revolutions per minute, it equates to 5.5 horsepower. But we know that the maximum output isn’t actually at 3600 rpm, and the power is around 6.5 horsepower. With little to no effort, you can take your Predator engine to the next level and reach speeds of up to 35 miles per hour.
However, many people need to realize that they can modify and make changes to these machines to create even more powerful machines. Adding performance parts can significantly increase the speed and power of your go-kart.
How Can You Make Your 212 Predator Go Kart Engine Performance Better?
Remove The Governor
Governors on engines like the Predator 212 are designed to keep the motor’s revolutions per minute at 3600. If the motor starts to go too fast, the throttle will close.
You can remove or bypass the governor to go past that limit. If you’re planning on driving higher than 3600 rpm for extended periods of time, it’s best to remove this part completely.
When you remove the governor, you can expect the engine to be able to go as fast as 5000 rpm. However, it is most likely that the engine will be limited to 4500-4700 rpm, depending on many other factors.
Change The Intake
An intake and air filter can restrict the amount of air that enters the engine. This can reduce power and performance. You are effectively increasing its performance by reducing restrictions on the amount of air that can enter the motor’s combustion chamber.
That said, you can install a high-flow air filter and intake adapter kit to solve the problem. Installation is easy and only requires a screwdriver and a wrench.
Change The Exhaust
When it comes to engine performance, one important factor is how well the engine can breathe. You can opt for a high-flow header to help regulate quickly the amount of air that leaves the cylinders, resulting in a serious boost in torque and output.
Re-jet A Carburetor
If you’re planning on increasing airflow to your engine, you might also need to enlarge the jet, or you will run the risk of damaging the engine from overheating.
With all the extra air you are pumping into the motor, you might need to make the hole in the jet a little bigger. When choosing a jet size, most people opt for something like a #36 jet or #38 jet. By doing this, more fuel will be able to go into the combustion chamber.
How Fast Will A Predator 212cc Go?
The answer is: as fast as you want it to. Just like with any other vehicle, the maximum speed of your kart with this engine will depend on different setups.
Generally speaking, the maximum speed you can expect from a standard engine is 20-30 miles per hour. However, it can still vary depending on many factors, such as gear ratio, the size of the drive wheel, or the modification you add to the engine. So, if you want to go faster, ensure you’ve got the right setup for your needs.
How Much Hp Can You Get Out Of A Predator 212?
The Predator 212cc engine is a displacement engine that can produce a maximum output of 6.5 horsepower. However, you can replace its stock parts with performance-enhancing parts, which would increase the output and speed. Some try to upgrade the engine completely and see the amazing result of producing up to 15 hp and 7500+ rpm.
Are Predator Engines Good For Go Karts?
The Predator 212cc engine is undoubtedly one of the best options for go-karts for several reasons:
- It’s fuel-efficient thanks to being an overhead valve engine.
- It’s very durable and withstands a lot of wear and tear.
- It performs smoothly and consistently, even in extreme conditions.
In addition, the predator engine has a built-in sensor that automatically shuts it down when it detects low oil levels. This prevents the motor from running when it lacks enough oil, damaging its performance.
Overall, the Predator 212cc engine is a great choice for anyone looking for a powerful and reliable engine for their go-kart.
What Is The Fastest Engine For A Go-Kart?
Several factors, such as weight, aerodynamics, and engine size, can impact a go-kart’s speed. According to theory, you can opt for a more powerful engine for a faster speed, and the fastest option you can choose is the 420cc engine.
Many 420cc engines can generate up to 16 hp at 3600 rpm. This high-performance motor is specifically designed for racing and can give you the edge you need to win races. Compared with other options, this model will outperform them.
The 212 predator go kart engine performance is great. It will provide you with the power you need to get the most out of your kart, and it’s fast enough to keep up with most of the other go-karts on the track.
If you have any questions about the engine, you can leave your comment below.
We want to build a community that loves motorsports and is willing to share knowledge and experience. What could be better than enjoying your favorite sport with people with the same passion?